Sol by Scan Dimension

Technical Specifications

Find all the specs and requirements for the SOL 3D scanner on this page or download the datasheet here.

 

Technical Specifications for the SOL 3D scanner

Object size

Maximum size:

100x100 mm / 3.9x3.9 inches cylinder in near scanner position

 170x170 mm / 6.7x6.7inches cylinder in far scanner position

Read about scanner positions in this Knowledge Base article.


Minimum size: 25x25 mm / 1x1 inch


Maximum load capacity of turntable: 2 kg / 4.4lbs


 

Specs

Accuracy: 0,1 mm / 0.004 inches (in near scanner position)


Camera resolution: 5 MP optical compensated


Working range: 210-360 mm / 8.3-14.2 inches (near and far scanner position)


Calibration: Automatic


Scanning

Scanning time: 360° automatic scan from start to finish* (incl. calibration, scanning, and meshing).

*depending on the object complexity and computer hardware


Reminders when scan is done:


Export file formats: OBJ, STL, PLY, XYZ, DAE which can be imported and used by other 3D software


3D printer compatibility: If a 3D printer supports any of the file formats above the scans can be printed in 3D


Data transfer: USB 3.0


Scan of texture and colors: Yes


Appending / adding scans: Yes


Software updates: Yes - requires registration of scanner


Release date: April 10, 2019


Country: Developed in Denmark



System requirements

Get help to see if your computer meets the system requirements, click here.

Supported operating systems

Microsoft Windows 10 64-bit (x64)

MacOS Sierra, or newer

Graphics card Minimum 2 GB memory, must support OpenGL 3.3 or higher

Recommended hardware

2.8 GHz processor

CPU: 4 cores (8 logical processors)

16 GB RAM

Min. 100 GB free disk space

USB 3.0 port or powered USB hub for power input

Internet access

Minimum hardware

2 GHz processor

CPU: 2 cores (4 logical processors)

8 GB RAM

Min 25 GB free disk space

USB 3.0 port or powered USB hub for power input

Internet access

Display: 1024 x 768 pixels

Note:  Microsoft SQ and Apple M1 ARM CPU’s are not supported

 

Scanner positions for different scans

Choose the correct scanner position for your object's size by following these simple guidelines.

Small objects

Diameter 25-100 mm / 1-4 inches and height 25-100 mm / 1-4 inches:

SOL 3D Scanner - Near Mode

Large objects

Diameter up to 170 mm / 6.7 inches and height up to 170 mm / 6.7 inches:

SOL by Scan Dimension

 

Hardware size

Dimensions: 48x20x28 cm / 19x8x11 inches


Weight3,18 kg / 7 lbs 



Need help?

Most of the questions can be found in our Knowledge Base:
Look up questions
Did you buy SOL and looking on getting started?
Quick Start Guide